+
  • 524.jpg

Triple Silver Low-E


In layman's terms, the composite film system coated with a silver film on the surface of the glass substrate is called single silver, and the composite film system coated with two silver films is called double silver. The so-called triple silver is a composite film system with three separated silver layers plated on the surface of the glass substrate. This is true in production. However, it does not necessarily mean that the glass coated with three layers of silver film is three silver, but there is another measure-the ratio of light to heat.

Regarding flat glass, the Taiwan market is stable in production and sales, and will continue to strengthen training of professionals, update automation technology and equipment, and focus on the sales of high-end building materials such as Low-E energy-saving glass and excellent white glass to increase the added value of products. With regard to the new material of micro-thin glass, the yield rate of 0.33mm thick glass has increased and it has been successively supplied to the mainland and American markets. At the same time, in response to the trend of lighter and thinner electronic protective covers and glass protective stickers, we actively develop products with thicknesses of 0.28mm and 0.25mm. Separate competition patterns and enhance product value and competitiveness.


Category:

Triple Low-e IGU

Keywords:

Color glazed glass / Digital printing glass / anti glare glass

E-mail:Info@taiwangglass.cc

Product Describe


The origin and superiority of three silver

 

Triple silver Low E insulating glass adopts our independent research and development of advanced glass coating technology in most countries (four-silver or five-silver LOW E coating products will not appear on the market in the later period, and the production cost is much greater than the energy-saving cost. It is currently an advanced and energy-saving glass products in the world.

Compared with the first and second generation Low E insulating glass.

 

Benefits:

 

Human body comfort:

 

Triple silver Low E insulating glass can block more than 98% of the outdoor solar heat, and transmits light and does not transmit heat. If the whole curtain wall uses triple silver Low E insulating glass, it can truly enjoy the "sun bath" of cold light source under transparent lighting, without burning sensation on the body, and can solve the problem of east-west sun exposure of buildings at the same time. In winter, it can reflect the indoor far-infrared heat radiation back into the room to keep the indoor heat from leaking out, which plays a good role in heat preservation.

 

The color is not distorted:

 

Compared with the first and second generation Low E, the appearance color of the triple silver Low E is more pure and beautiful, and the color reproduction degree is over 99%. It can greatly restore the natural color of the outdoor scenery and conform to the human vision’s pursuit of transparency and real beauty avoiding visual distortion in indoor observation.

 

Glass Category

Light to Heat Ratio LSG

Coated Glass

LSG<1

Single Silver Glass

1≤LSG<1.5

Double Silver Glass

1.5≤LSG<2.0

Three Silver Glass

2.0≤LSG<2.4

 

Table II

 

Let's look at a set of offline coating data:

 

Configuration

Tv

%

Ro

%

Shgc

Uw


Sc


LSG

6mm Solar

64

18

0.66

5.55

0.76

0.97

6single lowe+12A+6

66

10

0.49

1.83

0.56

1.35

6 Double lowe+12A+6

67

11

0.37

1.65

0.43

1.81

6 Triple lowe+12A+6

67

14

0.29

1.63

0.33

2.31

 

Table Three

 

It can be seen from the above data that while keeping the visible light transmittance close, as the number of silver layers in the film increases, the heat penetration gradually decreases. Compared with single silver and double silver, triple silver Low-E coated glass can control the heat balance to the maximum. The use of low-e glass, especially the three-silver Low-E building, cannot get in the outdoor heat in summer, but cannot get out of the indoor heating in winter. It has superior thermal insulation and an excellent "warm in winter and cool in summer" effect.


In the field of low-e glass, Sanyin Low-E coated glass has unparalleled superiority.

Regarding flat glass, the Taiwan market is stable in production and sales, and will continue to strengthen training of professionals, update automation technology and equipment, and focus on the sales of high-end building materials such as Low-E energy-saving glass and excellent white glass to increase the added value of products. With regard to the new material of micro-thin glass, the yield rate of 0.33mm thick glass has increased and it has been successively supplied to the mainland and American markets. At the same time, in response to the trend of lighter and thinner electronic protective covers and glass protective stickers, we actively develop products with thicknesses of 0.28mm and 0.25mm. Separate competition patterns and enhance product value and competitiveness.

Welcome to your message for consultation

Our staff will contact you within 24 hours (working days). If you need other services, please call the service hotline: 400 886 3286