+
  • 65.jpg

Bent Glass



Category:

Bent Glass

Keywords:

Color glazed glass / Digital printing glass / anti glare glass

E-mail:Info@taiwangglass.cc

Product Describe


The bent glass is a curved glass made by heating and softening flat in a mold and then annealing to bend by its own gravity, which is mainly used in buildings and civil occasions. In buildings use, the hot-bent glass is mainly used for building interior and exterior decoration, daylighting roof, sightseeing elevator, arched corridor, etc. In civilian use, the bent glass is used for furniture, aquariums, wash basins, counters, decorations and so on.

 

Single curved tempered glass

The single curved tempered glass is also a kind of pre-stressed glass. The method of tempering is changing the curved radian of the front and back on the basis of the same direction of the glass according to the requirements, thus to better fit the requirements of the aesthetic function of the design. 


Multi-curved tempered glass

The multi-curved tempered glass is also a kind of pre-stressed glass. The method of tempering is changing the curved radian of the front and back on the basis of two or more directions of the glass according to the requirements, thus to better fit the requirements of the aesthetic function of the design. 

 

Generally, the hyperboloid is called a torus, for example, a lifebuoy. The hyperbolic curved steel glass is a piece of surface removed from the torus. The glass surfaces that our company made before have both hyperboloids and helicoids. Later, they were all designed into helicoids. The spiral surface can achieve complete uniformity of the surface and the motion trajectory. The hyperbolic curved steel glass is not very good. It is necessary to consider its curvature to select the relevant equipment, set specific parameters, and debug it frequently to make qualified glass.    The hyperbolic curved steel glass or aluminum plate can be seen as a piece of windmelon skin on a watermelon, so it is easy to understand that it is curved in both the horizontal and vertical directions, so it is called the hyperbolic curved steel glass. This kind of glass is mostly used in the form of domes, spheres, and hemispheres. It can be produced through calculation and derivation of circle, sphere, curvature and 3D coordinate lofting. Safety: When the qualified hyperbolic curved steel glass is broken, the fragments are very small, and the number of fragments in the area of ​​50mmx50mm is not less than 40. The fragments are basically straight in section and appearance, without sharp corners, and will not cause damage to people . Impact resistance: It will not be broken after receiving 1040g steel ball from 1 meter high free fall impact. Bending strength: The bending strength can reach 200ma. Optical function: The optical function of glass does not change during the tempering process. Heat resistance stability: Pour molten lead liquid (327℃) on glass at room temperature without breaking. Heat the hyperbolic bent steel glass to 200°C and put the glass in water at 25°C without breaking.    When the hyperbolic bent steel glass is heated to close to the softening point, it cools rapidly on the surface of the glass, so that the contraction stress is distributed on the surface of the glass, and the tensile stress is in the center layer. Due to the strong and equal shrinkage stress, the tensile stress generated by the external pressure is offset by the strong shrinkage stress of the glass, which increases the safety of glass use. The strength of hyperbolic bent steel glass is about 5 times that of ordinary glass. When the glass is damaged by external force, it becomes large beans, reducing damage to the human body. Can withstand rapid changes in temperature.

Welcome to your message for consultation

Our staff will contact you within 24 hours (working days). If you need other services, please call the service hotline: 400 886 3286